FU4B-1&FC325-1 Dispensing & Filling System
FU4B-1&FC325-1 Dispensing & Filling System

FU4B-1&FC325-1 Dispensing & Filling System

$4,348.00

Product Introduction

Mainly designed for automatic filling and dispensing machine.
304sst housing has good corrosion resistance.
Controller FC32S-1 and dispensing system FU4B-1 are separated, to allow flexible mounting way.
Each dispensing unit has four channels.
Flow rates0.1ml/bottle-9999.99ml/bottle
Max. Number of Channels32

Main Functions and Features

- Control mode: Off-line (Controller FC32S-1 control), On-line (external signal control or communication control)
- Start/stop control signal input: 1 switch signal for each dispensing unit
- No bottle signal input: 4 swithc signals corresponding to 4 channels for each dispensing unit.
- Communication function: RS485 communication interface, Modbus protocol, communication parameters. (address, baud rate, parity, stop bit) can be set through touchscreen.
- Dispensing calibration: Dispensing volume of every channel can be calibrated through percentage, volume, weight or average weight method.
- Channel enable: Every channel can be set as enable or disable.
- Fill/Backflow: All the channels can be set as enable or disable.
- Channel address: Communication address of each channel can be set through independent membrane key and displayed on independent LED.
- Password function: Protect the system parameters and prevent misoperation through the password function
- Dipensing parameter set: Dispensing parameters can be saved as a parameter set which can be invoked easily without reset it.

Technical Specifications

- Dispensing volume:  0.1ml-9999.99ml (resolution: 0.01ml)
- Dispensing time: 0.5s-6000s (resolution: 0.01s)
- Interval time: 0.5s-999.9s
- Dispensing cycle: 0-999999, "0" means unlimited cycles
- Delay time before back suction: 0-60.0s
- Back suction angle: 0-1000 degree
- Channel quantity: 4 (one dispensing unit), 32 (eight dispensing units)
- Display: LCD
- Dispensing unit dimension (L*W*H): One unit (4 channels): 663*218*177 mm
- Controller dimension (L*W*H): 228*60*146 mm
- Power supply: One unit (4 channels): AC220V+/-20%, 300W;  Controller: AC 90-260V.10W
- Operating temperature: 0-40 celsius degree.
- IP rating: IP31
- Weight: One dispensing unit: 12 kg, controller 1.7kg.

Other parameters

Pump Head Ref. Dispensin Volume
 (ml)
Tubing Dispensing
Inner Diameter
(mm)
YZ1515x
YZII15
FG15-13
0.3-0.5 13# ≤0.5
1.0-2.3 14# ≤1.0
2.6-5.1 19# ≤1.5
4.6-9.1 16# ≤2.0
44853 25# ≤3.0
15-30 17# ≤3.0
YZ2515x 8.0-17 15# ≤3.0
44919 24# ≤3.0
YZII25 8.5-17 15# ≤3.0
15-24 24# ≤3.0
18-36 35# ≤3.0
25-48 36# ≤3.0
FG25-13 44821 15# ≤3.0
44919 24# ≤3.0
DMD15-13 0.1-0.9 2*13# ≤0.5
0.2-2.3 2*14# ≤1.0
0.5-5.9 2*19# ≤2.0
2.0-1.0 2*16# ≤3.0
5.0-25 2*25# ≤3.0