Langer Instruments
T600-SE02/ SC02 with integrated driver OEM Peristaltic pump
T600-SE02/ SC02 with integrated driver OEM Peristaltic pump
Couldn't load pickup availability
Compact size and structure, utilizing a NEMA 23 stepper motor with an integrated driver.
SE02- Control the pump through digital signals, analog signals and pulse signals.
SC02- Communication control of the pump via the RS485 interface (supporting the Modbus RTU).
Compatible with various peristaltic pump heads with a wide flow range.
| Parameters | T600-SE02-01/ T600-SC02-01 |
| Motor type | Stepper motor |
| Control circuit board | Yes |
| Max. flow rate(Single Channel) | ≤3000mL/min |
| Pumphead model | No (to be ordered separately) |
| Pump speed | ≤600rpm |
| Control mode |
SE02- DIP switch，4-20mA，0-5V，0-10V，0-10kHz SC02- RS485，Modbus RTU or Longer OEM protocol |
| Control feature | Pump speed，start/stop，direction |
| Dimensions(L x W x H) | 143x102x118(mm) |
| Installation method | Panel mount or soleplate mount |
| Power supply | DC24V/15W |
| Operating temperature | 0℃-40℃ |
| Relative humidity | ＜80% |
| Weight | 1.29kg |
Technical Specifications
|
T100-SE02-01/ T100-SC02-01 |
T300-SE02-01/ T300-SC02-01 |
T600-SE02-01/ T600-SC02-01 |
|
|
Pump Speed |
0-100rpm |
0-300rpm |
0-600rpm |
|
Speed resolution |
0.1rpm |
1rpm |
1rpm |
| Running direction control |
Pump running direction is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for clockwise, contact closed for counterclockwise. |
||
|
Start/stop control |
Start/stop is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for start, contact closed for stop. |
||
| DIP switch setting for pump speed |
The DIP switch can set the pump speed to 0-100rpm, and each DIP position corresponds to a step of 5rpm. |
The DIP switch can set the pump speed to 0-300rpm, and each DIP position corresponds to a step of 10rpm. |
The DIP switch can set the pump speed to 0-600rpm, and each DIP position corresponds to a step of 20rpm. |
| External signals for pump speed |
The pump speed will be proportional to the external speed signal: 4-20mA, 0-5V, 0-10V, 0-10kHz. The relationship between the signal range and speed range can be configured through communication commands. RS485 interface, supporting both Modbus RTU protocol and Longer Pump OEM protocol. Control the pump speed, start/stop, running direction, and prime status (full speed) via communication commands. And the pump status when power up can be configured. |
||
|
Output |
DC5V 100mA |
||
|
Power supply |
DC24V/15W |
DC24V/45W |
DC24V/55W |
|
Dimensions(L*W*H) |
121x102x118(mm) |
143x102x118(mm) |
|
|
Mounting method |
Panel mount or soleplate mount |
||
|
Working condition |
Temperature: 0℃-40℃, relative humidity＜80% |
||
|
Weight(without pump head) |
1.29kg |
1.61kg |
|
Compatible Pump Head and Tubing
|
Pump Head |
Tubings |
Max Flow Rate(mL/min) T100-SE02-01 |
Max Flow Rate(mL/min) T300-SE02-01 |
Max Flow Rate(mL/min) T600-SE02-01 |
|
YZ1515X,YZII15 |
13#，14#，19#，16#，25#，17#，18# |
380 |
1100 |
2200 |
|
YZ2515X |
15#，24# |
270 |
800 |
1600 |
|
YZII25 |
15#，24#，35#，36# |
500 |
1500 |
3000 |
|
FG15-13 |
13#，14#，19#，16#，25#，17#，18# |
430 |
1200 |
2400 |
|
FG25-13 |
15#，24# |
320 |
1100 |
2200 |
|
DMD15-13-B DMD15-13-D |
2x13#, 2x14#, 2x19#, 2x16#, 2x25# |
375 |
1035 |
2070 |
|
BZ15-13-A |
14# |
22 |
75 |
150 |
|
BZ15-13-B |
16# |
80 |
230 |
460 |
|
BZ15-14-C |
25# |
150 |
480 |
960 |
|
BZ15-14-D |
17# |
270 |
800 |
1600 |
|
BZ25-13-B |
24# |
250 |
800 |
1600 |
|
DG15-24 |
16#，25#，17# |
300(Single Channel) |
900(Single Channel) |
1800(Single Channel) |
|
DG15-28 |
13#，14#， ID≤3.17mmW.T. 0.8-1mm |
75(Single Channel) |
Not Recommended |
Not Recommended |
|
DG-(1,2,4,6,8) 6 rollers |
ID≤3.17mm W.T. 0.8-1mm |
48(Single Channel) |
Not Recommended |
Not Recommended |
|
DG-(1,2,4) 10 rollers |
ID≤3.17mm W.T. 0.8-1mm |
32(Single Channel) |
Not Recommended |
Not Recommended |
|
BPH01 |
13#，14#，19#，16#，25# |
80 |
240 |
530 |
Dimensions
Flow Curve
Compact size and structure, utilizing a NEMA 23 stepper motor with an integrated driver.
SE02- Control the pump through digital signals, analog signals and pulse signals.
SC02- Communication control of the pump via the RS485 interface (supporting the Modbus RTU).
Compatible with various peristaltic pump heads with a wide flow range.
| Parameters | T600-SE02-01/ T600-SC02-01 |
| Motor type | Stepper motor |
| Control circuit board | Yes |
| Max. flow rate(Single Channel) | ≤3000mL/min |
| Pumphead model | No (to be ordered separately) |
| Pump speed | ≤600rpm |
| Control mode |
SE02- DIP switch，4-20mA，0-5V，0-10V，0-10kHz SC02- RS485，Modbus RTU or Longer OEM protocol |
| Control feature | Pump speed，start/stop，direction |
| Dimensions(L x W x H) | 143x102x118(mm) |
| Installation method | Panel mount or soleplate mount |
| Power supply | DC24V/15W |
| Operating temperature | 0℃-40℃ |
| Relative humidity | ＜80% |
| Weight | 1.29kg |
Technical Specifications
|
T100-SE02-01/ T100-SC02-01 |
T300-SE02-01/ T300-SC02-01 |
T600-SE02-01/ T600-SC02-01 |
|
|
Pump Speed |
0-100rpm |
0-300rpm |
0-600rpm |
|
Speed resolution |
0.1rpm |
1rpm |
1rpm |
| Running direction control |
Pump running direction is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for clockwise, contact closed for counterclockwise. |
||
|
Start/stop control |
Start/stop is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for start, contact closed for stop. |
||
| DIP switch setting for pump speed |
The DIP switch can set the pump speed to 0-100rpm, and each DIP position corresponds to a step of 5rpm. |
The DIP switch can set the pump speed to 0-300rpm, and each DIP position corresponds to a step of 10rpm. |
The DIP switch can set the pump speed to 0-600rpm, and each DIP position corresponds to a step of 20rpm. |
| External signals for pump speed |
The pump speed will be proportional to the external speed signal: 4-20mA, 0-5V, 0-10V, 0-10kHz. The relationship between the signal range and speed range can be configured through communication commands. RS485 interface, supporting both Modbus RTU protocol and Longer Pump OEM protocol. Control the pump speed, start/stop, running direction, and prime status (full speed) via communication commands. And the pump status when power up can be configured. |
||
|
Output |
DC5V 100mA |
||
|
Power supply |
DC24V/15W |
DC24V/45W |
DC24V/55W |
|
Dimensions(L*W*H) |
121x102x118(mm) |
143x102x118(mm) |
|
|
Mounting method |
Panel mount or soleplate mount |
||
|
Working condition |
Temperature: 0℃-40℃, relative humidity＜80% |
||
|
Weight(without pump head) |
1.29kg |
1.61kg |
|
Compatible Pump Head and Tubing
|
Pump Head |
Tubings |
Max Flow Rate(mL/min) T100-SE02-01 |
Max Flow Rate(mL/min) T300-SE02-01 |
Max Flow Rate(mL/min) T600-SE02-01 |
|
YZ1515X,YZII15 |
13#，14#，19#，16#，25#，17#，18# |
380 |
1100 |
2200 |
|
YZ2515X |
15#，24# |
270 |
800 |
1600 |
|
YZII25 |
15#，24#，35#，36# |
500 |
1500 |
3000 |
|
FG15-13 |
13#，14#，19#，16#，25#，17#，18# |
430 |
1200 |
2400 |
|
FG25-13 |
15#，24# |
320 |
1100 |
2200 |
|
DMD15-13-B DMD15-13-D |
2x13#, 2x14#, 2x19#, 2x16#, 2x25# |
375 |
1035 |
2070 |
|
BZ15-13-A |
14# |
22 |
75 |
150 |
|
BZ15-13-B |
16# |
80 |
230 |
460 |
|
BZ15-14-C |
25# |
150 |
480 |
960 |
|
BZ15-14-D |
17# |
270 |
800 |
1600 |
|
BZ25-13-B |
24# |
250 |
800 |
1600 |
|
DG15-24 |
16#，25#，17# |
300(Single Channel) |
900(Single Channel) |
1800(Single Channel) |
|
DG15-28 |
13#，14#， ID≤3.17mmW.T. 0.8-1mm |
75(Single Channel) |
Not Recommended |
Not Recommended |
|
DG-(1,2,4,6,8) 6 rollers |
ID≤3.17mm W.T. 0.8-1mm |
48(Single Channel) |
Not Recommended |
Not Recommended |
|
DG-(1,2,4) 10 rollers |
ID≤3.17mm W.T. 0.8-1mm |
32(Single Channel) |
Not Recommended |
Not Recommended |
|
BPH01 |
13#，14#，19#，16#，25# |
80 |
240 |
530 |
Dimensions
Flow Curve