Product Introduction

Mainly designed for automatic filling and dispensing machine.
304sst housing has good corrosion resistance.
Controller FC32S-1 and dispensing system FU4B-1 are separated, to allow flexible mounting way.
Each dispensing unit has four channels.
Flow rates：0.1ml/bottle-9999.99ml/bottle
Max. Number of Channels：32

Main Functions and Features

- Control mode: Off-line (Controller FC32S-1 control), On-line (external signal control or communication control)
- Start/stop control signal input: 1 switch signal for each dispensing unit
- No bottle signal input: 4 swithc signals corresponding to 4 channels for each dispensing unit.
- Communication function: RS485 communication interface, Modbus protocol, communication parameters. (address, baud rate, parity, stop bit) can be set through touchscreen.
- Dispensing calibration: Dispensing volume of every channel can be calibrated through percentage, volume, weight or average weight method.
- Channel enable: Every channel can be set as enable or disable.
- Fill/Backflow: All the channels can be set as enable or disable.
- Channel address: Communication address of each channel can be set through independent membrane key and displayed on independent LED.
- Password function: Protect the system parameters and prevent misoperation through the password function
- Dipensing parameter set: Dispensing parameters can be saved as a parameter set which can be invoked easily without reset it.

Technical Specifications

- Dispensing volume: 0.1ml-9999.99ml (resolution: 0.01ml)
- Dispensing time: 0.5s-6000s (resolution: 0.01s)
- Interval time: 0.5s-999.9s
- Dispensing cycle: 0-999999, "0" means unlimited cycles
- Delay time before back suction: 0-60.0s
- Back suction angle: 0-1000 degree
- Channel quantity: 4 (one dispensing unit), 32 (eight dispensing units)
- Display: LCD
- Dispensing unit dimension (L*W*H): One unit (4 channels): 663*218*177 mm
- Controller dimension (L*W*H): 228*60*146 mm
- Power supply: One unit (4 channels): AC220V+/-20%, 300W; Controller: AC 90-260V.10W
- Operating temperature: 0-40 celsius degree.
- IP rating: IP31
- Weight: One dispensing unit: 12 kg, controller 1.7kg.

Other parameters

Pump Head	Ref. Dispensin Volume (ml)	Tubing	Dispensing Inner Diameter (mm)
YZ1515x YZII15 FG15-13	0.3-0.5	13#	≤0.5
	1.0-2.3	14#	≤1.0
	2.6-5.1	19#	≤1.5
	4.6-9.1	16#	≤2.0
	44853	25#	≤3.0
	15-30	17#	≤3.0
YZ2515x	8.0-17	15#	≤3.0
YZ2515x	44919	24#	≤3.0
YZII25	8.5-17	15#	≤3.0
	15-24	24#	≤3.0
	18-36	35#	≤3.0
	25-48	36#	≤3.0
FG25-13	44821	15#	≤3.0
FG25-13	44919	24#	≤3.0
DMD15-13	0.1-0.9	2*13#	≤0.5
	0.2-2.3	2*14#	≤1.0
	0.5-5.9	2*19#	≤2.0
	2.0-1.0	2*16#	≤3.0
	5.0-25	2*25#	≤3.0